Skip to content
Shop Bitcoin Australia Buy a Bitaxe →
Firmware · 6 min read

AxeOS Firmware Tracker: Latest Stable ESP-Miner Release

The current stable AxeOS/ESP-Miner release, what changed, and a source-linked checklist for deciding whether to update your Bitaxe.

A Bitaxe's AxeOS dashboard displaying a version number and changelog entries, with firmware binary files floating around it.

AxeOS is the browser interface supplied with ESP-Miner, the open-source firmware used by Bitaxe and several compatible miners. Release details below come from the project’s official GitHub releases, not from an estimated roadmap.

Freshness check: this page was verified on 31 October 2026. Firmware moves quickly; confirm the releases page before downloading or flashing anything.

Latest stable: v2.15.4

ESP-Miner v2.15.4 was published on 21 October 2026. It is a single-change maintenance release: it replaces the embedded CA trust store, per the changelog entry “replace embedded CA trust store after eMudhra compromise”.

The project labels v2.15.4 as a normal release, not a prerelease. That makes it the current stable version as at our verification date.

Should you update?

Reasonable for most supported boards, after the usual checks. v2.15.4 is a narrow fix on top of the v2.15 feature release. If you are coming from v2.14.x or earlier, you are also taking the v2.15.0 changes below, so read those first. Before updating:

  1. Record your current version, board/model number, pool settings and tuning values.
  2. Confirm that the release provides an asset for your exact board when using a factory image.
  3. Download only from the official release page.
  4. Keep the miner on stable power and do not interrupt a flash.
  5. After reboot, confirm the version, pool connection, temperature, power and accepted-share counters.

If your miner is stable and you are unsure which board image applies, stop and ask the manufacturer or seller rather than guessing.

What changed in the v2.15 series

v2.15.3, 20 September 2026

v2.15.3 derives AxeOS low-frequency warnings from the device presets.

v2.15.2, 18 September 2026 (prerelease)

v2.15.2 was published as a prerelease. Its notes list a fix for reconnect storms from slow clients, BM1372/BM1373 ASIC driver support, and Bitaxe Color support (Naja Duo and Gamma Hex with an ST7789 display). Treat it as a testing build.

v2.15.1, 29 August 2026

v2.15.1 fixed the download-assets message on the update page and swarm IPs, and disabled RSNO client support to fix WPA2/WPA3 compatibility mode.

v2.15.0, 21 August 2026

v2.15.0 was the large feature release. Two notes are flagged as important in the changelog:

  • the AxeOS web interface is now embedded in the main firmware binary (esp-miner.bin), so a separate www.bin upload is no longer needed when updating, and you should refresh the dashboard page afterwards; and
  • mDNS support, so you can open AxeOS by the miner’s hostname instead of its IP address.

It also adds multi-line charts, total uptime and hashes, improved undervoltage detection, Bluetooth LE, a higher VIN allowance for solar, more pools in the quicklink service, per-pool Stratum V2 “require authentication”, and an upgrade to ESP-IDF 6.0.2.

What changed in the v2.14 series

v2.14.1: 19 June 2026

v2.14.1 added board version 603 support and a configurable self-test warm-up temperature. It also fixed swarm-device editing and a buffer overflow in rejected-share statistics.

v2.14.0: 4 June 2026

v2.14.0 was the large feature release. Its official changelog includes:

  • a customisable and more responsive AxeOS dashboard;
  • log downloads that survive soft reboots;
  • visible firmware-update progress;
  • pause/resume mining and fan-controller tuning;
  • WebSocket API support;
  • Stratum V2 protocol support and per-share response-time measurement;
  • fixes for hashrate spikes, reconnect counter overflow, small Stratum memory leaks and power-reading races; and
  • an update to ESP-IDF 5.5.3.

The v2.14.0 notes are extensive. Read the full official changelog if any of those areas affect your setup.

Important correction to the original tracker

An earlier version of this article described a supposed v2.7.4 release and features attributed to it. The official repository has no v2.7.4 release or tag. Those details have been removed rather than carried forward. The official v2.7 series ends at v2.7.2.

Updating without creating a recovery job

In-place update

From v2.15.0 the official releases include a single esp-miner.bin for in-place updates (the web interface is embedded, so there is no separate www.bin), alongside board-specific factory images. On v2.14.x and earlier, in-place updates used both esp-miner.bin and www.bin. Use the update path documented by the project or exposed by your current AxeOS installation; do not substitute a factory image for a normal update unless the official instructions call for it.

Factory or recovery image

Factory assets are named for particular board versions, for example esp-miner-factory-601-...bin. The number matters. Verify the hardware/board version before selecting one and use the project’s documented flashing tool and offsets.

We intentionally do not publish generic esptool offsets here: recovery layouts can change, and a copied command for the wrong board is more dangerous than helpful.

Before and after checklist

Before

  • Export or record pool, Wi-Fi and tuning settings.
  • Photograph the board/model identifier if it is not already documented.
  • Read the release notes for the target version and the version immediately before it.
  • Keep a copy of the known-working release you are replacing.

After

  • Confirm the displayed firmware version.
  • Confirm the intended pool and worker are connected.
  • Watch temperatures, power and share acceptance for at least 30 minutes.
  • If you had custom frequency or voltage settings, reintroduce them only after a stable stock run.

Primary source: the bitaxeorg/ESP-Miner releases page. Last manually verified 31 October 2026.

Frequently Asked Questions

What is the latest stable ESP-Miner release?

As checked on 31 October 2026, the latest non-prerelease release is v2.15.4, published on 21 October 2026. Always confirm the releases page before updating.

Should I install every new release immediately?

No. Read the release notes, confirm support for your exact board version, and wait if your miner is stable and the release does not fix a problem you have.

Which file should I download?

For an in-place web update, use the files and instructions shown for your installed version. Factory images are board-specific: do not guess the board number or flash a factory image intended for another model.

Published 16 April 2026 · Updated 31 October 2026 · Reviewed Oct 2026
By Shop Bitcoin Australia